High Temperature EPDM Suction and Discharge Service

Sani-Tech® G-FDA is built for higher temperatures and more chemically demanding applications.  It boasts our highest temperature rating for any non-fluoropolymer-lined rubber covered hose.

 

The non-PVC, non-butyl, FDA-approved, all EPDM liner will not iimpart any taste or odor.

 

A robust dual-helix wire reinforcement allows the EPDM liner to withstand full vacuum, making it the best EPDM-lined hose for suction and discharge service.

 

Features and Benefits

 

  • Sanitary suction and discharge hose
  • White EPDM liner
  • EPDM cover and reinforcements designed to withstand rough handling and high temperatures
  • Full vacuum rating
  • Food oil and ozone resistant
  • Custom laylines available
  • Specially designed to handle oil-based materials
  • Imparts no taste or odor

 

 

Color 
  • Gray
Construction 
  • Inner tube: White EPDM
  • Cover: Gray EPDM reinforced with two spirals of dual-helix wire
Fittings 
  • PermaSeal® permanent
Temperature Rating 
  • -40° to +300°F
Approvals 
  • FDA, USDA, 3A

 

Sani-Tech® Rubber Hose: G-FDA Series Hose Specifications

 

Hose Specifications 
Part
Number
Inside
Diameter
in. (mm)
Outside
Diameter
in. (mm)
Max.*
Working
Pressure
PSI
Min.
Bend
Radius
in.**
Vacuum
in HG
Burst
Pressure
(PSI)
Weight
lb./ft.
GFDA-0500 .500 (12.7) .931 (23.6) 150 2.50 29.9 600 0.23
GFDA-0750 .750 (19.1) 1.182 (30.0 150 3.75 29.9 600 0.31
GFDA-1000 1.000 (25.4) 1.500 (38.1) 150 4.00 29.9 600 0.39
GFDA-1500 1.500 (38.1) 2.090 (53.1) 150 5.00 29.9 600 0.81
GFDA-2000 2.000 (50.8) 2.600 (66.0) 150 6.00 29.9 600 1.16
GFDA-2500 2.500 (63.5) 3.173 (80.6) 150 7.00 29.9 600 1.70
GFDA-3000 3.000 (76.2) 3.718 (94.4) 150 8.00 29.9 600 1.96
GFDA-4000 4.000 (101.6) 4.781 (121.4) 150 11.00 29.9 600 3.01

  * Based on ambient condition on exterior of hose.  Elevated temperatures and characteristics of medium being transferred can affect working pressures and burst pressures.
** Measured on the inner surface of the curved portion.  Data is based on static applications.  For dynamic or cyclic applications, consult factory.