Dobbins Company

SaniGard® Gladiator® Crush Resistant GCR Rubber Hose – Saint Gobain

Category:
Request a Quote

Description

Features and Benefits

 

  • Abrasion resistant non-marking cover perfect for high traffic areas
  • Crush resistant
  • Monofilament helix allows hose to return to original shape after being twisted, kinked or run over by a vehicle
  • Suitable for Clean-In-Place (CIP)
  • High pressure rated

 

 

Color 
  • Red with yellow or white stripe
Construction 
  • Inner tube: white butyl or synthetic polyester
  • Cover: EPDM reinforced with multiple fabric spirals with monofilament helix
Fittings 
  • PermaSeal® permanently installed or ReSeal® reusable
Temperature Rating 
  • -40° to +225°F (continuous)
  • +250°F (intermittent)
Approvals 
  • FDA, USDA, 3A, CFIA

 

SaniGard® Gladiator® Crush-Resistant GCR Rubber Hose Specifications

 

Hose Specifications 
Part
Number		 Inside
Diameter
(in.)		 Outside
Diameter
(in.)		 Max.
Working
Pressure
(PSI)		 Min. Bend
Radius (in.)		 Vacuum
in HG		 Weight
(lb./ft.)
GCR150 1-1/2 2-5/32 250 5.0 20 1.05
GCR200 2 2-21/32 250 7.0 20 1.33
GCR250 2-1/2 3-6/32 250 12.0 20 1.77
GCR300 3 3-24/32 250 18.0 20 2.3
GCR400 4 4-24/32 250 36.0 20 2.94

Warning:  Gladiator® is rated at 20 HG (about 75% vacuum) but will actually pull a full vacuum when new. Repeated collapsing of the hose by twisting, kinking, etc., creates a “soft spot” that reduces vacuum capabilities, even though the hose rebounds to its original shape.

Note: All SaniGard® product pressure ratings are shown at ambient temperature (68°F). As temperatures increase, working pressure and vacuum ratings will decrease. Contact factory for recommendations for assembly applications that exceed 200°F.

Related products