Bio-Pro® Forged – Top Line

Category:

Description

 
Bio-Pro® forged bodies are manufactured from ASTM A182 GR F316L material with additional controls in regards to chemical content. The sulfur content is maintained to meet and exceed the stringent requirements of BPE.All forgings are solution annealed to maintain the ferrite content to be .05% or less. This low ferrite content eliminates the concern for contaminants and migration of oxides throughout the system. Machining of the contours are performed by using state of the art cad/cam system assuring repeatability of the weir and valve cavity profiles for full drainability. Each forging contains two hash marks clearly indicating the drain angle plane for ease of installation. Bio-Pro® forged bodies are in compliance with FDA guidelines as well as cGMP principles, and are specifically designed for use in ultra pure applications where sterility is critical. Top Line provides these bodies with heat numbers etched into them for full traceability. Mill test summaries are provided with each shipment. Bio-Pro® forged diaphragm valves are available in sizes ranging from 1/2” through 6” with clamp or weld end connections and surface finishes ranging through 10 RA. Top Line can also manufacture valves in AL6XN, Titanium, Hastelloy C, or other alloys if required.
Here are some key standard features to consider for your next requirement:
  • Low ferrite DIN 1.4435 316L forged body sizes 1/4″-4″ with controlled sulfur content to ASME BPE 2007 0.005-0.017 with 3.1B Material Certification
  • Autoclaveable Viton® o-ring sealed 304SS stainless steel manual bonnet with adjustable PPS thermoplastic handwheel
  • Thermoplastic piston type pneumatic actuators with your choice of popular controls for feedback (Westlock, StoneL, Burkert, etc.)
  • FDA and USP Class VI (Sections 87 & 88) conforming steam grade EPDM, TFM/EPDM, and TFM/Viton® backed diaphragms
  • Specialty fabricated sterile access and GMP style valves
  • Zero DL machined block body style valve types – Point of Use, T-pattern, Divert style, Tank Bottom, and many others specialties as designed
  • Interchangeable diaphragms and topworks with most other manufacturers
  • Extensive on the shelf inventory for project support