Click for brochure The CIP MIDI system is intended for small to medium CIP applications, and caters for the following capacities and sizes, up to a maximum of 2 CIP circuits per CIP set. CIP MIDI Sizing Information Flow Rate Tank Size Pump Suction Discharge & Return One CIP Circuit Two CIP Circuits LPH
Read more →
Click for brochure The CIP Mini system is a single-use system with a choice of tank sizes and is designed for efficient cleaning of pipeline systems, tanks and processing plants. CIP MINI Sizing Information Model Flow Rate Tank Size Tank Drop Discharge & Return LPH GPM (US) Litres Gallons (US) O.D. Inches O.D. Inches
Read more →
Standard version The VPN valve is a 3A certified non-return valve which is used when backflow of the product in pipelines must be avoided. The valve which only consists of a few parts, is a cost-effective alternative to the DELTA RUF valve.
Click for datasheet The spring-loaded, full stroke safety valves DELTA SI 2 are approved for fluids and gases. They are used where containers or tanks have to be secured against excess pressure. As a result of their hygienic design they are especially suitable for use in brewing and drinks technology, the dairy industry, the food
Read more →
Click for datasheet The DELTA CPV Valve is a membrane valve designed to ensure a constant product pressure in the hygienic process applications. A constant pressure is kept by diminishing/enlarging the free flow section at the valve seat.
Click for datasheet Vacuum valves DELTA VRA and DELTA VRAH are proving their reliability everywhere that requires vessel or tank protection against vacuum. The valves are manufactured using chrome nickel steel; all product-contact parts are AISI 316 series stainless steel. A proximity switch may be fitted in the actuator as a valve position feedback signal,
Read more →
Click for datasheet The DELTA RUF valve is a non-return valve which is used when backflow of the product in pipelines must be avoided.The valve is very easy to maintain due to the inter-flage design meaning that the valve can easily be removed from the product line.
Click for datasheet APV has specially developed the DELTA UF pressure relief valves to protect installations against excess pressure. If the set pressure is exceeded, the valve opens; if the pressure sinks below the set value (up to a maximum of 20%), the valve closes.
Click for datasheet product safety is your top priority, you should use sampling valves DELTA PR2 from APV. With these valves bacteriologically safe samples can be taken direct from the pipeline. Main advantages Prevention of infection thanks to a Teflon shaft and a special shaft guide. No additional seat seal required Cleaning is assured. No
Read more →
With a proven record of thousands of successful installations, the APV DELTA CU3 control unit is recognised as a reliable and cost effective solution amongst customers all over the world. APV DELTA CU3 control units are available with the following fieldbus protocols: DeviceNet Profibus Furthermore, APV DELTA CU3 is used when seat lift detection is
Read more →
