How It Works for Dairy Farm Applications With hard water, the molecules of calcium carbonate and magnesium are too large to easily penetrate the membrane of the cows stomach, causing poor feed conversion and less than adequate water consumption. After treating the cows drinking water, the hardness molecules are now in an easily digestible size,
Read more →
Easily installed, washer mounts on wall away from water, vapors & fumes Extended “vacuum on” drying cycle Normally open drain valve for complete draining (Included) Extended “drain” period insures complete drainage between cycles Heavy Duty, unbreakable, acid and detergent jars Follow all state & local electrical codes when installing
4 or 6 cycle–user has option not to use sanitation cycles Pre-rinse without recirculation–only clean water sprayed into tank and drained directly out. Rinse Cycle – Lukewarm water, recirculated, tempers tank interior, drained. Wash Cycle – Hot water and detergent recirculated, positive cleaning, then drained. Rinse Cycle – Optional acidified rinse, recirculated, drained.OFF (Manual Advance
Read more →
Click for brochure Strahman’s CEC-1000 stainless steel cabinets keep mixing units and hoses out of the way and free from dust. Any standard Strahman wall-mounted mixing unit-hose station can be installed in this spacious cabinet, which is designed with flush hinges to allow the unit’s large double doors to swing open at 180, making it
Read more →
Sani-Matic Central High Pressure (CHP) systems are custom designed to efficiently clean facilities and process equipment by supplying consistent pressure and the appropriate amount of water flow to multiple drop stations operating throughout the facility. Every CHP system is sized to the flow requirements of each drop station, which are appropriately located throughout the plant
Read more →
Click for brochure The CIP MIDI system is intended for small to medium CIP applications, and caters for the following capacities and sizes, up to a maximum of 2 CIP circuits per CIP set. CIP MIDI Sizing Information Flow Rate Tank Size Pump Suction Discharge & Return One CIP Circuit Two CIP Circuits LPH
Read more →
Click for brochure The CIP Mini system is a single-use system with a choice of tank sizes and is designed for efficient cleaning of pipeline systems, tanks and processing plants. CIP MINI Sizing Information Model Flow Rate Tank Size Tank Drop Discharge & Return LPH GPM (US) Litres Gallons (US) O.D. Inches O.D. Inches
Read more →
Click for brochure Sani-Matic Clean-In-Place (CIP)/Clean-Out-Of-Place (COP) Dual Function washers provide portability and multifunction use for periodic cleaning of vessels, tanks and lines. The versatility of this unit provides a lower capital investment than traditional CIP systems with quality performance.
Click for brochure Use standard or customized COP baskets to reduce handling, damage, and loss of expensive machine parts. These standard baskets are available with modified feet, handles, dividers, and/or covers.
Click for brochure Each Sani-Matic COP washer comes with Sani Matic’s exclusively designed sanitary jet manifolds, which are fully welded and machined to eliminate unsanitary crevices and create consistent, high velocity jet flow. Angled side jets create circular turbulent flow side to side while end jets create turbulent flow lengthwise, which is ideal for cleaning piping and
Read more →
Click for brochure Turn to Sani-Matic for quick delivery of your industry compliant tanks. With a variety of standard and custom features, Sani-Matic tanks and vessels can be specified to meet your facility’s needs conveniently and efficiently. Our experienced sales staff will answer your questions and help you find the proper tank to support your
Read more →
Sani-Matic Clean-In-Place (CIP) Dual Operating Systems clean two CIP circuits simultaneously offering substantial space and cost saving advantages over two separate units.
High volume fill wash (1” hot and cold water valves) • Adjustable timer for wash cycle • Automatic sanitizing cycle • System safety protection • Complete automated pipeline cleaning and sanitizing • For Double-8 Parlors & Larger • Follow all state & local electrical codes when installing
Click for brochure Sani-Matic’s patented Impact RFS™ system will clean your facility and process equipment effectively and efficiently with an integrated solution that is reliable and easy to use for your operators. “More is better” is not always true. More chemical, more water, very high pressures can all be dangerous for your people and equipment,
Read more →
Click for brochure The M-144TG Safety Unit is designed to blend steam and cold water in any desired proportion; the unit features a safety steam shut-off which prohibits passing live steam. User adjustable with a factory-set maximum temperature, this unit is equipped with dial type gauge that indicates the exact wash temperature in both Celsius
Read more →
Click for brochure Strahman’s mixing units-hose stations for hot and cold water are designed to thoroughly mix hot and cold water in any desired proportion. They are available in both standard bronze models (M-159) and models made completely of stainless steel (M-750). All exposed parts are either bronze chrome-plated or stainless steel depending on the
Read more →
Click for brochure The Model M-200TS features rugged construction and superb quality for superior thermostatic control. The unit’s accurate and solid, liquid-filled thermostat allows you to set the exact output water temperature desired — from 80F to 160F. With its durable chrome-plated body construction, the M-200TS valve features replaceable components that resist corrosion. Both the
Read more →
Click for brochure Designed for use where concealed piping and attractive appearance are required, these hose stations produce hot or cold water. The compact unit includes a single control valve, stainless steel hose rack and mounting attachment.
Click for brochure Click for manual This unit produces hot water instantly from a steady supply of steam and cold water. All mixing units-hose stations in the M-5000TG/M-5700TG Series are equipped with a dial-type gauge that indicates the wash water’s exact temperature. Users can easily regulate the temperature by turning the unit’s steam and cold
Read more →
Click for brochure The Model M-5000TS lets you combine steam and cold water to produce hot water efficiently — without the safety concerns normally associated with steam use. Allowing for a maximum water temperature of 200°F, the automatic unit includes an easy-to-use temperature gauge that senses even slight variations to monitor water temperature accurately. The
Read more →
Click for brochure Click for manual This unit produces hot water instantly from a steady supply of steam and cold water. All mixing units-hose stations in the M-5000TG/M-5700TG Series are equipped with a dial-type gauge that indicates the wash water’s exact temperature. Users can easily regulate the temperature by turning the unit’s steam and cold
Read more →
Click for brochure Strahman’s mixing units-hose stations for hot and cold water are designed to thoroughly mix hot and cold water in any desired proportion. They are available in both standard bronze models (M-159) and models made completely of stainless steel (M-750). All exposed parts are either bronze chrome-plated or stainless steel depending on the
Read more →
Click for brochure These hot or cold water hose stations are designed for use wherever hose service is required. The compact units include a single control valve, stainless steel hose rack and mounting attachments. Wall-mounted unit is designed to mount one inch away from the wall.
Click for brochure Sani-Matic Meat Stick Washers provide consistent, repeatable results of product sticks for smoked and dried sausage, other meats, fish, or cheese. Sani-Matic’s unique conveyor design improves cleaning efficiency with a submerged tumbling action and increased detergent agitation. The simple, fast and ergonomic loading and unloading minimizes worker exposure and chemical use while
Read more →